All Products of General

LE 24/11 Muffle Furnace

LE 24/11 Muffle Furnace

This entry line muffle furnace can be used for various applications up to Tmax 1100°C.
DSC PT 1000

DSC PT 1000

DSC PT 1000 was developed to provide a general purpose TM – DSC with a broad temperature range (-180 – 600°C) for all common applications. Furthermore emphasis was placed on an extremely stable baseline and high reproducibili...
DSC PT 1600

DSC PT 1600

The LINSEIS high temperature DSC PT 1600 (HDSC/DTA) is designed to deliver highest calorimetric sensitivity, short time constants and a condensation free sample chamber.
TGA PT 1000 - Cost effective Thermobalance

TGA PT 1000 - Cost effective Thermobalance

The Linseis TGA PT1000 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design. Even at a sample weight of up to 5g the tara is done electronically.
TGA PT 1600 - High End Thermobalance

TGA PT 1600 - High End Thermobalance

The Linseis TGA PT 1600 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design.
TGA MSB PT 1 - Magnetic Suspension Balance

TGA MSB PT 1 - Magnetic Suspension Balance

With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done.
THB - Transient Hot Bridge - Basic, Advance, Ultimate (NEW)

THB - Transient Hot Bridge - Basic, Advance, Ultimate (NEW)

Transient Hot Bridge (THB) simultaneously delivers the three material properties thermal conductivity, thermal diffusivity and specific heat after just a few minutes, regardless of whether you have placed the corresponding sensors...
HFM – Heat Flow Meter

HFM – Heat Flow Meter

The LINSEIS Heat Flow Meter provides a rapid and easy to use instrument to determine the thermal conductivity properties of low thermal conductive insulation materials as well as all other materials with a high level of accuracy.
HCS 1/ 10/ 100 – Hall Effect Measurement System

HCS 1/ 10/ 100 – Hall Effect Measurement System

The HCS System permits the characterization of semiconductor devices, it measures: mobility, resistivity, charge carrier concentration and Hall coefficient
TMA PT 1000 - Thermomechanical Analyzer

TMA PT 1000 - Thermomechanical Analyzer

The design of the LINSEIS TMA PT1000 Thermomechanical Analyzer guarantees highest precision, reproducibility and accuracy. The system was constructed to perform a variety of Thermomechanical experiments on an array of sample shape...
DIL L75 HP High Pressure Dilatometer

DIL L75 HP High Pressure Dilatometer

The Linseis high pressure dilatometer DIL L75 HP enables completely new applications in thermal analysis. The system can measure expansions (length changes) in the temperature range from RT up to 1100/1400/1800°C and in the press...
DIL L78 QDT / RITA - Quenching Dilatometer and Deformation Dilatometer

DIL L78 QDT / RITA - Quenching Dilatometer and Deformation Dilatometer

The Quenching and Deformation Dilatometer L78 QDT is especially suitable for the determination of TTT, CHT and CCT diagrams. The special induction furnace enables heating and cooling speeds in excess of 4000 K/s. The system compli...
Chip-DSC 1, 10 and 100

Chip-DSC 1, 10 and 100

The Chip-DSC is the miniaturized Differential Scanning Calorimeter (DSC) from LINSEIS Thermal Analysis. DSC detects endothermic and exothermic transitions like the determination of transformation temperatures and enthalpy of solid...
DIL L75 PT Horizontal

DIL L75 PT Horizontal

The horizontal dilatometer DIL L75 H was developed to meet the demands of the academic community and research laboratories worldwide. With this system, thermal expansion behavior of solids, liquids, powders and pastes for a variet...
Page 1 of 6 (83 products)

Material Science & Nanotechnology