SingaporeSG
ChinaCN
MalaysiaMY
IndonesiaID
MyanmarMM
Analytical Science
AOTF-NIR Spectrometer (In-line Process)
Luminar 3060 Multiplexer AOTF-NIR Spectrometer
The Brimrose Luminar 3060 Multiplexer AOTF-NIR Spectrometer is designed for at-line measurement in a production facility with up to 16 active channels.
Brand: Brimrose
Not Available
Free delivery within Singapore only
The Brimrose Luminar 3060 Multiplexer AOTF-NIR Spectrometer is designed for at-line measurement in a production facility with up to 16 active channels. Each channel is connected to a probe or flow cell with fiber-optic cable. A single spectrometer is multiplexed by rapidly switching the light source from each channel into the detector. All 16 channels can be sequentially analyzed in less than 1 minute.
The 3060 can be a cost-effective option when needing multiple test points and not wanting to purchase multiple 4030’s (or another Brimrose AOTF-NIR model). Choosing between a 4030 and 3060 depends upon the number of test points required and the location of each test point due to the length of fiber-optics required to be run.
Technical Specification
| Spectral Range Options | 850-1700 nm, 900-1800 nm, 1100-2300 nm (standard) |
| Measurement Modes | Transmission, Reflectance and Transflectance |
| Spectral Resolution | 2-10 nm |
| Wavelength Accuracy | ± 0.5 nm |
| Wavelength Repeatability | ± 0.01 nm |
| Ambient Light Rejection | > 106 |
| S/N at 70% Range (closed loop) | < 10μabs in transmission, and < 40μabs in reflectance |
| Non-Linearity | 0.1 % |
| Signal Digitalization | 16-bit A/D (1 part in 65,536) |
| Sampling Speed | 16,000 wavelength/sec |
| Diagnostic | 10 Built-in monitoring sensors |
| Optical Fiber Cables | Low OH Silica Fiber for Near-IR/Fluoride Fiber for Extended Near-IR |
| Channel Number | Up to 16 |
| Switching Time | < 0.25sec for any channels |
| Power Requirements | 24 VDC, 110Watts, 110VAC 60Hz, 220VAC 50 Hz |
| Cooling Options | Fan-cooled, A/C-cooled, Vortex-cooled, TE-cooled |
| Communication | OPC UA, Modbus (Serial or TCP), I/O with 4-20mA, TCP/IP Ethernet |
| Enclosure (W x H x D) | 720 mm x 794 mm x 325 mm Stainless Steel NEMA 4X, 12X; Explosion-proof options available |
Specification :
| Specifications | Kindly refer to the "Overview" tab. |
No publications found...