SingaporeSG
ChinaCN
MalaysiaMY
IndonesiaID
MyanmarMM
Material Science & Nanotechnology
Thermal Analyzer
DIL L78 QDT / RITA - Quenching Dilatometer and Deformation Dilatometer
The Quenching and Deformation Dilatometer L78 QDT is especially suitable for the determination of TTT, CHT and CCT diagrams. The special induction furnace enables heating and cooling speeds in excess of 4000 K/s. The system complies with ASTM A1033.
Brand: LINSEIS
Available
Free delivery within Singapore only
Specifications
| MODEL | DIL L78/RITA Q QENCHING |
|---|---|
| Furnace: | Induction Furnace |
| Temperature range: | -150°C up to 1600°C |
| Price range: | $$ |
| Sample geometry: | solid/hallow samples |
| Sample diameter: | ø 3 mm |
| Sample length: | 10 mm |
| Heating rates: | ≤ 4000 K/s |
| Cooling rate: | ≤ 4000 K/s |
| Length change measurement: | +/- 2,5 mm / +/- 5 mm |
| MODEL | DIL L78/RITA Q/D QUENCHING + DEFORMATION |
|---|---|
| Furnace: | Induction Furnace |
| Temperature range: | -100°C up to 1600°C |
| Price range: | $$$ |
| Sample geometry: | solid and hollow samples |
| Sample diameter: | ø 3 mm |
| Sample length: | 10 mm |
| Heating rate: | ≤ 4000 K/s |
| Cooling rate: | ≤ 2500 K/s |
| Length change measurement: | +/- 1,2 mm (resolution 0,01 µm) |
| Data sampling rate (for temeprature, length, force): |
≤ 1 kHz |
| MODEL | DIL L78/RITA Q/D/T QUENCHING, DEFORMATION AND TENSION |
|---|---|
| Furnace: | Induction Furnace |
| Temperature range: | -100°C up to 1600°C |
| Price range: | $$$ |
| Sample geometry: | solid samples |
| Sample diameter: | ø 5 mm |
| Sample length: | 10 mm |
| Heating rates: | ≤ 125 K/s |
| Cooling rates: | ≤ 125 K/s |
| Heating and cooling rates (combinded deformation): |
max. 100 K/s |
| Deformation force: | 22 kN |
| Deformation rate: | 0.01 – 100 mm/s (more on request) |
| True strain: | 0.02 to 1.2 ms |
| Length change measurement: | +/- 5 mm (resolution 0,05 µm) |
| Data sampling (for temperature, length, force): |
≤ 1 kHz |
| Minimum pause between two deformation steps: | 60 ms |
| Atmoshphere: | protective gases, vacuum down to 10-5 mbar |
| Mechanical control modes: | stroke, force, strain rate (optional) |
No specifications found...
No publications found...